JL Audio Slash v3 600W mono D osztályú erősítő JL600/1V3
@ 4 Ω 600 W RMS x 1
@ 3 Ω 600 W RMS x 1
@ 2 Ω 600 W RMS x 1
@ 1.5 Ω 600 W RMS x 1
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω 600 W RMS x 1
@ 3 Ω 600 W RMS x 1
@ 2 Ω 600 W RMS x 1
@ 1.5 Ω 600 W RMS x 1
General Specifications
Frequency Response 5 Hz - 250 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power >95 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W (Main Channels) >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >500 / 50 Hz
Damping Factor @ 2 Ω >250 / 50 Hz
THD+N @ Rated Power (Main Channels) <0.05% @ 4 Ω
Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 60 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s) Low-Pass only
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 40 Hz -200 Hz
Detented, Calibrated Filter Freq. Potentiometer Yes
Filter Defeat Function Yes
Infrasonic Filter Variable, Defeatable
Bass Boost EQ Parametric
Output Polarity Switch No
Remote Subwoofer Level Control No
Remote Bass EQ Boost Control Optional (RBC-1)
Pass-Through Preamp Output Buffered, w/independent filter