JL Audio Slash v3 4 csatornás 4x75W A/B osztályú erősítő JL300/4V3
Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω 75 W RMS x 4
@ 3 Ω 75 W RMS x 4
@ 2 Ω 75 W RMS x 4
@ 1.5 Ω 75 W RMS x 4
Bridged @ 8 Ω 150 W RMS x 2
Bridged @ 4 Ω 150 W RMS x 2
Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω 75 W RMS x 4
@ 3 Ω 75 W RMS x 4
@ 2 Ω 75 W RMS x 4
@ 1.5 Ω 75 W RMS x 4
Bridged @ 8 Ω 150 W RMS x 2
Bridged @ 4 Ω 150 W RMS x 2
General Specifications
Frequency Response 5 Hz - 30 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >108.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >89.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >300 / 50 Hz
THD+N @ Rated Power <0.03% @ 4 Ω per Ch.
Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 40 A (AFS, AGU or MaxiFuse™)
Signal Processing
Filter Mode(s) Low-Pass or High-Pass
Filter Slope(s) 12/24 dB/octave
Filter Frequency Range 50 Hz - 5 kHz
Detented, Calibrated Filter Freq. Potentiometers Yes
Filter Defeat Function Yes
Remote Level Control No
Remote Level Modes N/A
Channel Input Mode Switch Yes (2/4 ch.)
Pass-Through Preamp Output None
Source Channel Selection for PreOuts N/A